logo

उत्पादों का विवरण

Created with Pixso. घर Created with Pixso. उत्पादों Created with Pixso.
IMU एक्सेलेरोमीटर Gyro
Created with Pixso.

Tactical Grade MEMS IMU HG4930 Replacement ±200°/s Gyro 100Hz Bandwidth

Tactical Grade MEMS IMU HG4930 Replacement ±200°/s Gyro 100Hz Bandwidth

ब्रांड नाम: FIREPOWER
मॉडल संख्या: HG4930C
एमओक्यू: 1
कीमत: 6500$
भुगतान की शर्तें: एल/सी, डी/पी, टी/टी, वेस्टर्न यूनियन
आपूर्ति करने की क्षमता: नमूने के लिए 1 सप्ताह
विस्तृत जानकारी
उत्पत्ति के प्लेस:
चीन
प्रमाणन:
CE
Gyro गतिशील माप सीमा:
± 200 °/s (अनुकूलन योग्य)
शून्य-पूर्वाग्रह स्थिरता (@ एलन विचरण):
≤0.2 °/h
शून्य पूर्वाग्रह स्थिरता (10s चिकनी):
≤0.5 °/h
यादृच्छिक चाल:
0.02°/√h
बैंडविड्थ:
100Hz
Acc रेंज:
± 30 ग्रा
Acc शून्य पूर्वाग्रह स्थिरता (एलन विचलन):
30ug
वोल्टेज:
5V
कंपन:
10 ~ 2000Hz , 6.06g
वज़न:
120 ग्रा
पैकेजिंग विवरण:
स्पंज + कार्टन
आपूर्ति की क्षमता:
नमूने के लिए 1 सप्ताह
प्रमुखता देना:

Tactical MEMS IMU HG4930 replacement

,

HG4930 IMU with ±200°/s gyro

,

MEMS IMU accelerometer 100Hz bandwidth

उत्पाद वर्णन
Tactical Grade MEMS Inertial Measurement Unit Honeywell HG4930 Replacement
The MEMS Inertial Measurement Unit (IMU) consists of three-axis gyroscope, three-axis accelerometer, temperature sensor, signal processing board, structure and necessary software. It measures three-axis angular rate, three-axis acceleration and three-axis inclination angle of a carrier, outputting compensated data (including temperature compensation, installation misalignment angle compensation, and nonlinear compensation) through RS-422 serial port using an agreed communication protocol.
Technical Specifications
Gyroscope Specification
Parameter Unit HG4930C
Measuring range (customizable) °/s ±200
Zero-bias stability (@ Allan variance) °/h 0.2
Zero-bias stability (10 s smoothing, 1σ, room temperature) °/h 0.5
Zero-bias error over full temperature range °/h 2.5
Random walk °/√h 0.02
Zero-bias repeatability °/h 1
Zero bias acceleration sensitivity °/h/g 1
Resolution °/h 2
Scale factor nonlinearity ppm 100
Scale factor repeatability ppm 100
Cross coupling % 0.2
Bandwidth Hz 100
Accelerometer Specification
Parameter Unit HG4930C
Measuring range (customizable) g ±30
Zero-bias stability (Allan Variance @ 25 ℃) ug 30
Zero-bias stability (1s smoothing) ug 700
Zero-bias error over full temperature range mg 1.5
Random walk m/s/√h 0.01
Zero-bias repeatability mg 2
Scale factor repeatability ppm 200
Scale factor nonlinearity ppm 200
Cross coupling % 0.2
Bandwidth Hz 100
Outline Drawing
Tactical Grade MEMS IMU HG4930 Replacement ±200°/s Gyro 100Hz Bandwidth 0